Filter & pour-over · 2 min read
Pour-over essentials and a starter recipe
A recipe is a baseline for comparison. Weigh your coffee and water, note the grind and time, then adjust to taste rather than chasing a perfect-looking pour.
Updated

Starter recipe
For one mug, begin with 15 g of coffee and 250 g of water, a ratio of about 1:16.7. Use water just off the boil for many medium roasts, or slightly cooler for delicate light roasts. Rinse the paper and preheat the vessel, then discard the rinse water.
Pouring sequence
These times are a starting framework. A different dripper, coffee or grind will change the drawdown.
- 0:00: add 50 g water and gently ensure all grounds are wet.
- 0:45: pour steadily up to 150 g total water.
- 1:15: pour up to 250 g total water.
- Allow the bed to drain. Aim for a total time around 2:30 to 3:30, then taste.
Taste before adjusting
A fast drawdown with a thin, sour cup can point toward a finer grind. A slow drawdown with bitterness or dryness can point toward coarser. Change the grind in small steps and keep the recipe unchanged while comparing.
Use the live timer
The Brewhaus brew timer calculates coffee and water from servings and strength. It also provides a step-by-step timer so you can repeat the same sequence.






